AMC Hydraulic Lifter

1961-80 AMC V-8 (287, 290, 304, 327, 343, 360, 390 & 401 CID) 1971 -89 Jeep V-8 ( 304 & 360 CID) Clay Smith Cams Hydraulic flat tappet lifters are made in the USA and of the Highest Quality available.   Diameter  .904  

Clay Smith Jeep 6 Cylinder Hydraulic Lifters (12)

Clay Smith Cams made in the USA - Hydraulic lifters  AMC / Chrysler / Jeep .904 Diameter

Chrysler "Mopar" Hydraulic Lifters

Clay Smith Hydraulic Flat Tappet  Lifters are made in the USA and of the Highest Quality available.. Diameter  .903      

Pontiac V8 Hydraulic Lifters

Clay Smith Cams Hydraulic lifters are made in the USA    1975-1979 All Pontiac V8 (350,400,455 CID) 1956-1974 Pontiac V8 ( except Ram Air IV, 400 CID)     Pontiac V8  Outside Diameter  .842

Oldsmobile V8 Hydraulic Lifters

Clay Smith Cams Hydraulic lifters are made in the USA    1964 V8 (350 CID), 1965-1974 all V8 (Except 1966-67 400.422 CID & Tornado 425 CID) 1975-1984 (260,307,350,403 & 455 CID)   Oldsmobile V8  Outside Diameter  ...

AMC 4 Cylinder Hi-Rev Hydraulic Lifter

1984-90 AMC 4-Cylinder (2.5L, 150 CID) Clay Smith Cams Hydraulic Hi-Rev flat tappet lifters are made in the USA and of the Highest Quality available. These hydraulic lifters are precision-manufactured to maintain precise valve timing under all...

V-6 Buick Hydraulic Lifters

Clay Smith Cams hydraulic lifters are precision-manufactured in the USA to maintain precise valve timing under all operating conditions. A patented constant orifice metering valve provides precise oil metering to the overhead valve train, and longer...

Old DeSota / Chrysler / Dodge Hydraulic Lifters

Clay Smith Hydraulic Flat Tappet Hi-Rev Lifters are made in the USA and of the Highest Quality available. 1953 - 1967 Chrysler V-8 ( After Eng No. 45946) 1954 DeSoto V-8 (after eng no. 50188) 1955-61 DeSoto V-8 1954 -68 Dodge Truck V-8 w/ Hyd (Exc...

FE Ford Hi Rev Hydraulic Lifters

1958-86 Ford V-8 (332, 352, 368, 383, 390, 410, 427, 428, 430 & 462 CID)  1964-80 Ford Truck V-8 ( 330, 352, 359, 360, 361, 389, 390, 391 & 428 CID) Clay Smith Cams Hi-Rev Hydraulic Flat Tappet Lifters are made in the USA of the Highest...

Old Oldsmobile V8 .921 OD Hydraulic Lifters (1966-1967 4-4-2 (400 CID) & 1966-1967 Tornado (425 CID)

  1957 - 1964 Oldsmobile V-8 ( Except J-88 & F-85) - 1966 - 1967 F-85 V-8 4-4-2 (400 CID) - 1966 - 1967 Tornado ( 425 CID)  Old Oldsmobile V8 Made in the USA Lifters Type: Hydraulic Flat .921 OD Hydraulic Lifters  Height (In): 2...

Clay Smith Jeep 6 Cylinder Hi Rev Hydraulic Lifters (12)

Clay Smith Cams made in the USA -  Hi-Rev Hydraulic lifters operate at or near zero lash for higher rpms without adjustment, unlike a mechanical setup. They have a reduced internal height to maintain the proper valve train geometry of a stock...

AMC Hi-Rev Hydraulic Lifter

1961-80 AMC V-8 (287, 290, 304, 327, 343, 360, 390 & 401 CID) 1971 -89 Jeep V-8 ( 304 & 360 CID) Clay Smith Cams Hydraulic Hi-Rev flat tappet lifters are made in the USA and of the Highest Quality available. These hydraulic lifters are...